Call (800) 603-1001 to order!
| Surface Spinners |
|
| Mosmatic FL-P Professional Surface Cleaner |
| No cleaning task is too much for this professional surface cleaner. Clean large areas like gas stations, parking lots, hangars and school yards. Industrial strength insures longevity. The Series features four 2¼" stainless steel, rubber treaded castors, a reinforced 21/30" stainless steel deck and a specially engineered high RPM Swivel which guarantees long lasting operation under tough conditions. |
 |  |
| FL-PH 520 (Part No. 80.774) | FL-PH 750 (Part No. 80.775) |
|
21" Stainless Steel Housing
4000psi Maximum Pressure
250°F Maximum Temperature
31lbs Weight
2 x Rotor Arm
1 x 1506 Nozzle for Wand
2 x 1503 Nozzles for Rotor Arm
Relax Action HP-Gun included
|
30" Stainless Steel Housing
4000psi Maximum Pressure
250°F Maximum Temperature
46lbs Weight
3 x Rotor Arm
1 x 1508 Nozzle for Wand
3 x 1503 Nozzles for Rotor Arm
Relax Action HP-Gun included
|
|
|
Features: |
 | Two Tools in One
The 30" Spray wand quick connects to the existing HP Gun. Always handy, this wand is ideal for cleaning out corners and other hard to reach areas, allowing you to go where your surface cleaner cannot. |
 | Height Adjustable
Stainless steel guard for extra strength and stability. Adjustable impact range guarantees an efficient cleaning on any type of surface and allows for a side to side sweeping action. |
 | Stainless Steel Castor ø 2¼"
Four 2¼" stainless steel castors with custom mounting ensure easy maneuvering even in tight spaces. |  | Swivel DYC
Swiss Engineering: High RPM stainless steel Swivel features reinforced self lubricated stainless steel ball bearings for improved performance. The dual spring based carbide seal system guarantees long lasting operation under tough conditions. |
|
Mosmatic FL-C Commercial Surface Cleaner The perfect cleaner for any type of contractor work. The stainless steel castors guarantee an effortless cleaning experience even for extended use. Clean sidewalks, parking lots, tennis courts, shop floors, patios or any other large surface. This Series features a specially engineered high rpm swivel which guarantees long lasting operation under tough conditions.
 |  | 
|  | FL-CG 520
21" Stainless Steel Housing
4000psi Maximum Pressure
250°F Maximum Temperature
24lbs Weight
2 x Rotor Arm
2 x 1503 Nozzles for Rotor Arm
Relax Action HP-Gun included |
FL-CR 520
21" Stainless Steel Housing
4000psi Maximum Pressure
250°F Maximum Temperature
27lbs Weight
2 x Rotor Arm
2 x 1503 Nozzles for Rotor Arm
Relax Action HP-Gun included |
FL-CRY 520
21" Stainless Steel Housing
7300psi Maximum Pressure
250°F Maximum Temperature
27lbs Weight
2 x Rotor Arm |
FL-CR 750
30" Stainless Steel Housing
4000psi Maximum Pressure
250°F Maximum Temperature
35lbs Weight
3 x Rotor Arm
3 x 1503 Nozzles for Rotor Arm
Relax Action HP-Gun included |
Accessories:
30" High Pressure Wand
Part No. 26.994 (4000psi version only)
Quick connects to your existing HP-Gun. Nozzle sold separately.
2½" Stainless Steel Wand Holder
Part No. 80.938
Easy to install. Pipe clamp included.
Our Steel Eagle Hose Reels are built tough...and built affordable. Each reel is manufactured with heavy gauge cold rolled metals to provide a durable reel capable of securely storing up to 550' of 3/8" pressure hose. Sizes from 8" to 22" to ensure that you'll get the reel that is right for you.
Specifications:
Hose Capacity
In Feet |
Size |
Model No. |
| Hose Size (I.D.) |
| 3/8" |
1/2" |
|
| 160' |
100' |
8" |
K01-0105 |
| 300' |
200' |
12" |
K01-0106 |
| 450' |
325' |
18" |
K01-0107 |
| 550' |
400' |
22" |
K01-0108 |
* Model numbers that end in "-1" are stainless steel as opposed to painted black.
| Non-Swivel |
| Mini Reel Plate Mount | | Capacity | Model | | 100' | K01-1000 | | 200' | K01-2000 | | 300' | K01-3000 |
|
 |
Mini Reel with
Slide-in Arm
Block Mount
Drop-in Arm
| | Capacity | Model | | 100' | K01-1024 | | 100' | K01-1025 | | 100' | K01-1026 |
|
   |
| Swivel |
| Slide-in Arm | | Capacity | Model | | 100' | K01-2024 | | 150' | K01-0310 | | 200' | K01-0206 | | 300' | K01-0311 |
|  |
Block Mount | | Capacity | Model | | 100' | K01-2026 | | 150' | K01-0301 |
|  |
| Drop in Arm | | Capacity | Model | | 100' | K01-2025 | | 150' | K01-0300 | | 200' | K01-0207 | | 300' | K01-0308 |
|  |
Wall Mount | | Capacity | Model | | 100' | K01-2027 | | 150' | K01-0302 | | 200' | K01-0208 | | 300' | K01-0312 |
|  |
| Flat Surface Mount | | Capacity | Model | | 100' | K01-2028 | | 150' | K01-0303 | | 200' | K01-0209 | | 300' | K01-0313 |
|  |
| Economy Reels | | Brass Swivel | | Capacity | Model | | 50' | K01-5000 | | 100' | K01-5001 | | 150' | K01-5002 | | 200' | K01-5003 |
|  |
Reel Cart | | Capacity | Model | | For 8' Reels | K01-0162 | | For 12" Reels | K01-0160 | | For 18' Reels | K01-0163 | | For 22' Reels | K01-0164 |
|  |
| Reel Hand Carry Frame | | Capacity | Model | | For K01-1000 | K01-1010 | | For K01-0105 | K01-0310 |
|  |
ST-357 Turbo Nozzles
Applications:
The increased tearing action of the rotating spray is ideal for hard surface applications, such as concrete graffiti cleaning or caked mud on heavy equipment. Always start turbo nozzles in down position.
Features:
-
The 0 degree rotation creates a cleaning and tearing action resulting in time and money savings.
-
Turbo nozzles increase cleaning efficiency as much as 200% compared to a 25 degree flat fan nozzle.
ST-49 Non-Rotating Sewer Nozzles
 Applications:
Slides easily into drain pipes and sewer lines flushing debris or clearing frozen pipes while attached to sewer hose.
Features:
- Backward ports drive the nozzle forward and flush debris while forward ports blasts into and breaks up clogs and debris.
- Rotating style adds extra agitation and surface cleaning.
- Rotating duct style has side ports.
- Corrosion resistant stainless steel construction.
- Physically small for cornering ability.
ST-59 Rotating Sewer Nozzles
Applications:
Slides easily into drain pipes and sewer lines flushing debris or clearing frozen pipes while attached to sewer hose.
Features:
· Backward ports drive the nozzle forward and flush debris while forward ports blasts into and breaks up clogs and debris.
· Rotating style adds extra agitation and surface cleaning.
· Rotating duct style has side ports.
· Corrosion resistant stainless steel construction.
· Physically small for cornering ability.
Duct Cleaners
TYR Duct Cleaner
MOSMATIC Duct Cleaners are specially designed to clean Ducts, Trash-Chutes, Vents, Restaurant Hoods, Tanks and more. This is the perfect accessory for any hot or cold pressure washer. Made of corrosion-resistant materials and stainless steel self lubricated bearings. The new and improved carbide swivel offers the highest quality Swiss made craftsmanship.
- All Duct Cleaners come with 3/8" NPTF water inlet.
- Requires two 1/8" Nozzles which are sold separately.
- Other versions and sizes available.
Duct Cleaner *fixed* TYR-f
None adjustable arms. Perfect for vertical chutes. 
|
Part No.
|
Diameter
|
Height
|
Weight
|
|
81.406
|
3"
|
2.4"
|
16 oz.
|
|
81.426
|
6"
|
2.8"
|
28 oz.
|
|
81.456
|
12"
|
2.8"
|
39 oz.
|
|
81.466
|
16"
|
2.8"
|
48 oz.
|
|
81.476
|
20"
|
2.8"
|
55 oz.
|
|
81.486
|
24"
|
2.8"
|
63 oz.
|
Technical Data
Temperature: 250° F
Pressure: 4000 psi
RPM: maximum 2000 rpm
Duct Cleaner *adjustable* TYR-s
Adjustable arms allow different spray angles. Perfect for 360° cleaning.
|
Part No.
|
Diameter
|
Height
|
Weight
|
|
81.506
|
3"
|
2.4"
|
16 oz.
|
|
81.526
|
6"
|
2.8"
|
28 oz.
|
|
81.556
|
12"
|
2.8"
|
39 oz.
|
|
81.566
|
16"
|
2.8"
|
48 oz.
|
|
81.576
|
20"
|
2.8"
|
55 oz.
|
|
81.586
|
24"
|
2.8"
|
63 oz.
|
Technical Data
Temperature: 250° F
Pressure: 4000 psi
RPM: maximum 2000 rpm
TYR Mobile
|
Part No.
|
Duct-Size
|
Weight
|
|
81.911
|
6-12"
|
9 lbs
|
|
81.902
|
12-20"
|
9.5 lbs
|
|
81.903
|
20-36"
|
15.6 lbs
|
Completely stainless steel. Side to side and height adjustable. For horizontal duct cleaning.
- height and width adjustable
- can be used with "all" duct cleaners
TYR Hook
Part No. 81.905
For pulling your Duct Cleaner through long stretches of duct work. Quickly attaches to existing cage.
ST-44 Sandblasting Kits
Applications:
Designed for sandblasting a variety of surfaces
and capable of removing most coatings down to
white metal, graffiti clean up, paint surface preparation, etc.
Features:
- Works on venturi principle
- Adjustable sand volume valve
- Available with steel or carbide sand nozzle
| Order |
Orifice |
Sand Nozzle |
Pressure (psi) |
Flow Rate (gpm) |
Weight (lbs) |
| 200055509 |
4.0 |
Steel |
3600 |
8 |
4.92 |
| 200055504 |
5.0 |
Steel |
3600 |
8 |
4.92 |
| 200055500 |
6.0 |
Steel |
3600 |
8 |
4.92 |
| 200055507 |
7.0 |
Steel |
3600 |
8 |
4.92 |
| 200055508 |
8.0 |
Steel |
3600 |
8 |
4.92 |
| 200055509C |
4.0 |
Carbide |
3600 |
8 |
5.17 |
| 200055504C |
5.0 |
Carbide |
3600 |
8 |
5.17 |
| 200055500C |
6.0 |
Carbide |
3600 |
8 |
5.17 |
| 200055507C |
7.0 |
Carbide |
3600 |
8 |
5.17 |
| 200055508C |
8.0 |
Carbide |
3600 |
8 |
5.17 |
| 200055491 |
4.0 |
None |
3600 |
8 |
4.52 |
| 200055494 |
5.0 |
None |
3600 |
8 |
4.52 |
| 200055492 |
6.0 |
None |
3600 |
8 |
4.52 |
Sludge Pumps
Accessories:
Easily attaches to pressure washer and turns it into a high output pump. Great for flood clean up, car wash pits, emptying pools or chemical spills. Casting Assembly w/ hose barb #200036500 (without coupling and nozzle)
Features:
Water flowing through the high pressure nozzle creates a powerful venturi suction that vacuums up slurry solutions.
Debris as large as 3/4 will pass through the casting and out the discharge hose.
Vacuums up liquid slurries at a ratio of about 1:11 Example: Using 4 GPM will produce an output of 44 GPM
Weight: 8 - 10 lbs
| Order 15ft |
Order 25ft |
Orifice (0 degree) |
Inlet |
Pressure (psi) |
Flow Rate |
Temp (F) |
| 999QC1540 |
999QC2540 |
4.0 |
1/4" M Q.C. |
4000 |
1:11 |
104 |
| 999QC1545 |
999QC2545 |
4.5 |
1/4" M Q.C. |
4000 |
1:11 |
104 |
| 999QC1550 |
999QC2550 |
5.0 |
1/4" M Q.C. |
4000 |
1:11 |
104 |
| 999QC1555 |
999QC2555 |
5.5 |
1/4" M Q.C. |
4000 |
1:11 |
104 |
| 999QC1560 |
999QC2560 |
6.0 |
1/4" M Q.C. |
4000 |
1:11 |
104 |
| 999001540 |
999002540 |
4.0 |
1/4" M
|
4000 |
1:11 |
104 |
| 999001545 |
999002545 |
4.5 |
1/4" M |
4000 |
1:11 |
104 |
| 999001550 |
999002550 |
5.0 |
1/4" M |
4000 |
1:11 |
104 |
| 999001555 |
999002555 |
5.5 |
1/4" M |
4000 |
1:11 |
104 |
| 999001560 |
999002560 |
6.0 |
1/4" M |
4000 |
1:11 |
104 |
 | 
Nyrim Ends 